Gledhill Stainless Lite Plus Unvented Indirect Cylinder 150 Litre
Gledhill Stainless Lite Plus Unvented Indirect Cylinder 150 Litre is for use with a conventional boiler such as gas or oil. Also has an electric immersion heater backup.
Available in 8 sizes ranging from 90 litres to 400 litres. The largest model is therefore capable of satisfying the hot water demands of a property with 3 bathrooms and 3 separate shower rooms.
The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils.
All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius.
Please note: All indirect models come with an on-peak back-up immersion therefore only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.
Features & Benefits:
– Designed for use with gas or oil boilers, either sealed system or open vented
– High efficiency corrugated coil maximises heat transfer to the cylinder of water
– Corrugated coil provides faster reheat times compared to plain coil
– 3kW incoloy immersion heater for emergency back-up
– 90° elbow, flexihose and drain valve supplied as standard
– Standard and slimline models available
The StainlessLite Plus Range:
StainlessLite Plus is a range of unvented hot water storage cylinders. They are manufactured in the latest high quality duplex stainless steel.
They are designed to provide mains pressure hot water and are supplied as a package which complies with Section G3 of the Building Regulations.
The appliance is extremely well insulated using high density HCFC free foam insulation with an ozone depleting potential (ODP) of zero and a global warming potential (GWP) of 2.
It is fitted with all necessary safety devices and supplied with all the necessary control devices to make installation on site as easy as possible.